Siemens GIGASET A580 User Manual page 116

If you have already entered details on the Web page, this is deleted as soon
as
Start Auto Configuration
and General Provider Data
are overwritten by the downloaded data.
Generally, you should not have to enter any additional data on this Web
page.
Please note
If the message Download of settings not possible! File is corrupt!
will be loaded onto the phone. Possible causes of this are:
u
The incorrect code has been entered (e.g. upper/lower case rules have not
been followed). If necessary, enter the code again.
u
The file that has been downloaded is invalid. Please consult your VoIP pro-
vider.
When the download is complete, the
¤
Activate the connection as described on
You can then be reached on the corresponding VoIP phone number.
u
Automatic configuration of general VoIP provider data
Precondition: You have received your account details from your VoIP pro-
vider (e.g. Authentication
Profile files of the most important VoIP providers are available to download
on the Gigaset Internet server. The address for the server is stored in your
£
phone ( Page 140).
To load the data onto your telephone, proceed as follows:
¤
Select Select VoIP Provider
information on the download procedure.
Please note
If you select the
Select VoIP Provider
to the Web page will be saved and checked. Values may need to be corrected
before the Select VoIP Provider
The download procedure consists of several steps:
¤
Select the
Next
¤
From the list, select the country for which the list of VoIP providers is to
be loaded.
¤
Select the Next
¤
Select your VoIP provider from the list.
If your provider is not included in the list, select
you will have to enter the general provider data by hand (see
eral Provider
¤
Select the
Finish
The details of the selected provider are loaded to your phone and saved
under General Provider Data
cannot make any further entries in these areas.
Web configurator – setting the phone using a PC
is selected. The fields in the
areas and the server addresses in the
Name, Authentication
in the Auto Configuration
button, any changes that have been made
operation is started.
button.
button.
Data" and "Area: Network" below).
button.
£
( Page 116) and
Personal Provider Data
Connections list will be displayed.
Page 120.
password).
area. This will display
Provider. In this case
Other
£
Network (
Network area
appears, no data
"Area: Gen-
Page 117). You
115