Buttons; Opening Web Pages - Siemens GIGASET A580 User Manual

Web configurator – setting the phone using a PC
Entering Cyrillic and Arabic characters
In the following, the specified maximum number of characters permitted in a
field refers to Latin characters and digits (1 character = 1 byte), i.e. 1 character
means 1 byte.
Cyrillic and Arabic characters require 2 bytes each, i.e. with a field length of 16
characters, for example, you can enter a maximum of 8 Cyrillic or Arabic char-
acters.
If you enter too many characters into a field, the entry will be rejected (not
saved on the base station). The "old" field content (e.g. the standard settings)
will remain in place and will be displayed again when the web page is updated.
No warning/confirmation is given.
Applying changes
As soon as you have made your change on a page, activate the new setting on
the phone by selecting Set.
If your input in a field does not comply with the rules for this field, an appropri-
ate error message will be displayed. You can then repeat the input.
Warning
Changes that have not been saved on your phone are lost if you move to
another Web page or if the Web configurator is logged off, e.g. due to exceed-
ing the time limit (

Buttons

Buttons are displayed in the bottom section of the working area.
Save entries on the phone.
Set
Cancel Reject changes made on the Web page and reload the settings that are cur-
rently saved in your phone to the Web page.

Opening Web pages

A brief outline of the navigation to the individual Web configurator functions is
given below.
Example
Setting DTMF signalling
Settings
To open the Web page, carry out the following steps after registration:
¤
Select the
¤
Select the
The Telephony
¤
Select the
The Web page from Figure 1 will be shown in the Web browser.
108
£
Page 105).
¢ ¢
Telephony Advanced Settings
Settings menu in the menu bar.
function in the navigation area.
Telephony
subfunctions are displayed in the navigation tree.
Advanced Settings
subfunction.