Connecting The Base Station To A Pabx; Dialling Modes And And Recall; Storing The Access Code (Outside Line Code) - Siemens Gigaset SL 100 User Manual

Connecting the base station to a PABX

The following settings are only needed when your PABX requires them, please refer to
the operating instructions for your PABX.
You cannot send or receive text messages on PABXs that do not support
i
Calling Line Identification.

Dialling modes and and recall

The current setting is indicated by ‰.
1. Step 2: Changing the dialling mode
The following dialling modes can be set:
Tone dialling (DTMF),
◆
Dial pulsing (DP).
◆
v
¢
Base Settings
s
OK
a
2. Step 2: Setting the recall
v
¢
Base Settings
s
OK
a

Storing the access code (outside line code)

Precondition: Your PABX requires you to enter an access code before the telephone
number when making an external call, e. g. "0".
v
¢
Base Settings
~
à
Save Entry
a
The access code will be automatically inserted before any of the numbers chosen from
the calls /answering machine list.
¢ ¢
Add. Features
Select and confirm a dialling mode (highlighted
with ‰).
Long press (back to idle status).
¢ ¢
Add. Features
Select and confirm recall (highlighted with ‰).
Long press (back to idle status).
¢ ¢
Add. Features
Enter or change the access code (maximum 3 digits)
and press the display key.
Confirm. The entry is stored.
OK
Long press (back to idle status).
Connecting the base station to a PABX
Dialling Mode
Recall
Access Code
91