First Steps; Installing The Base Station; Setting Up The Handset For Use - Siemens Gigaset C670 User Manual

First steps

Installing the base station

The base station is designed for use in
closed, dry rooms with a temperature
range of +5 °C to +45 °C.
Set up the base station at a central point in
your apartment or house.
Please note:
u
Never expose the telephone to heat
sources, direct sunlight or other electri-
cal appliances.
u
Protect your Gigaset from moisture,
dust, corrosive liquids and vapours.
Range and reception strength
Range:
u
Outdoors: up to 300 m
u
Indoors: up to 50 m
Connecting the base station
¤
First connect the power supply unit
and then the phone jack as shown
below.
1
1 Power supply unit 220 V
2 Phone jack with phone cord
Please note:
u
The mains adapter must always be
connected, as the phone will not oper-
ate without mains connection.
u
Only use the mains adapter and phone
cord supplied.
2
u
If you buy a replacement phone cord,
make sure that the phone jack has the
correct type of wiring.

Setting up the handset for use

Inserting the batteries
Warning:
Use only the rechargeable batteries recom-
mended by Gigaset Communicatins GmbH
Never use a conventional (non-rechargeable)
battery or other battery types as this could
result in significant health risks and personal
injury. For example, the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
* Gigaset Communications GmbH is a trademark
licensee of Siemens AG.
¤
Insert the batteries the right way
round.
The polarity is indicated in/on the battery
compartment.
Closing the battery cover
Put the cover on the phone as indicated on
the picture below. Push the cover upward
First steps
*
.
7