Siemens GIGASET A580 User Manual page 59

Network services
If the participant answers, you have the following options:
u
Toggling:
¤
Use q to toggle between the participants.
¤
End call with active participant:
Press the end call key a, to end the current call. The participant who
was previously waiting will automatically call you back.
u
Conference call:
¤
Talk to both participants:
¤
End conference call (toggle):
¤
End call with both participants: press the end call key a.
u
Call forwarding (provider-dependent):
You can connect the two external participants.
Preconditions:
– You are toggling calls and you phoned the currently active participant
yourself.
– You have activated call forwarding via the Web configurator
£
(
¤
Press the end call key a.
If call forwarding was successful, a message will appear to this effect. The
handset will then switch to idle.
If call forwarding was not successful, the participant who was previously
waiting will call you back.
Accepting a waiting call
Precondition: Call waiting is activated (
¢
§Menu§
You have the option of toggling or holding a conference call.
Please note
u
If the first call was an internal call, the internal connection is ended.
u
An internal, waiting call is shown on the display. You can neither accept the
internal call nor reject it.
u
When receiving an SMS, you will hear a call waiting tone (without screen
display).
58
Page 128).
Accept Call Waiting
¢
End Active
§Menu§
¢
Conference
§Menu§
¢
End Conference.
§Menu§
£
Page 57).
Call.
Call.