Activating/Deactivating Advisory Tones; Setting The Battery Low Tone - Siemens GIGASET A580 User Manual

Handset settings
Activating/deactivating the ringer
You can deactivate the ringer on your handset before you answer a call or when
the handset is in idle status; the ringer can be deactivated permanently or just
for the current call. The ringer cannot be re-activated while an external call is
in progress.
Deactivating the ringer permanently
*
Reactivating the ringer
*
Deactivating the ringer for the current call
§Menu§
Silent

Activating/deactivating advisory tones

Your handset uses various advisory tones to tell you about different activities
and statuses.
u
Key click: every key press is confirmed.
u
Confirmation tone (ascending tone sequence): at the end of an entry/set-
ting and when an SMS or a new entry arrives in the calls list
u
Error tone (descending tone sequence): when you make an incorrect entry
u
Menu end tone: when scrolling to the end of a menu
You cannot deactivate the confirmation tone for placing the handset in the
base station.
t
Advisory Tones
a

Setting the battery low tone

The battery warning tone advises that the batteries need to be charged. You
can activate it, deactivate it or decide whether or not it should sound during a
call.
t
Battery Low
/ /
On Off
a
90
Press and hold the star key until the Ú icon appears in the display.
Press and hold the star key in idle status.
Open menu.
Select and press
§OK§
Briefly press up on the control key.
Select and press
§OK§
Press and hold (idle status).
Briefly press up on the control key.
Select and press
§OK§
During Call
Select and press
§OK§
Press and hold (idle status).
.
(‰ = on).
.
(‰ = on).