Web configurator – setting the phone using a PC
In order for you to use your phone's messenger to "go online" and "chat" on the
Internet, the access data of a messenger server must be saved on your phone.
You can define a
if you are logged in (online) with the messenger server with several devices
(phone, desktop PC and laptop) at the same time using the same Jabber
The
Resource
cannot log in to the messenger server if it does not have a resource name.
You should assign a
each Jabber ID. The
sage.
Example
You are online using one of your phone's handsets and your PC both at the
same time. You have assigned your phone
and your PC
addressed to your Jabber ID will be sent to your phone.
¤
Open the following Web page:
¤
In the
Jabber server or another provider's messenger server (Other).
The access data for
played in
you can also register with the Gigaset.net Jabber server through your PC.
¤
Enter the user ID (max. 50 characters) and password (max. 20 characters)
that you used to register with the messenger server in the
Authentication password
Gigaset.net, the fields are preconfigured with your Gigaset.net account.
¤
In the
senger server with which you are registered for instant messaging.
Max. 74 alphanumeric characters.
If you have selected
ured with the name of the Gigaset.net server.
¤
Enter the number of the communication port on the Jabber server in the
Jabber server port
If you have selected
configured.
¤
Enter a resource name (max. 20 characters) in the
The default is: phone.
¤
Enter the priority for your phone in the
between -128 (highest priority) and 127 (lowest priority) for the priority.
The default is: 5
¤
Select Set.
Setting up Gigaset.net Jabber account
Your phone is already registered with the Gigaset.net Jabber server. An account
has been assigned to your phone.
134
Resource
name and a
name is used to distinguish between these devices. The phone
as each message will only be sent to one device for
Priority
Priority
determines which of the devices receives the mes-
(Resource
name "PC") priority 10. In this case, any message
Messenger Account
field, select whether you wish to use the
Gigaset.net
Jabber
ID,
Authentication password
fields. If you have selected
Jabber server
field, enter the IP address or the DNS name of the mes-
Messenger Account =
field. The default port is 5222.
Messenger Account = Gigaset.net,
Priority
for your phone. Both are required
(Resource
¢
Settings
Messaging
is already stored in the base station. It is dis-
and
Jabber
Gigaset.net, the field is preconfig-
field. Select a number
Priority
name "phone")
Priority
¢
Messenger.
Gigaset.net
server. With this data
Jabber ID
and
Messenger Account =
the port number is pre-
field.
Resource
ID.
5