Installing more than one washer
If the installation calls for more than one washer, align them with each other.
The minimum distance between adjacent machines and the user and maintenance areas (values I, S and T of
Figure 2.6) are specified on the table below.
Check the dimensions of the drain box and the drain pipe on the table below.
Positioning conditions (Fig. 2.6)
I
DISTANCE BETWEEN MACHINES (MINIMUM)
S
WORKING AREA
T
REAR MAINTENANCE AREA
A
DRAIN BOX
DRAIN PIPE
(x1; x2; x3)
Transport and location
HS-6040; HS-6057
EH090; EH130
HS-6085; HS-6110
EH190; EH255
HS-6040; HS-6057
EH090; EH130
HS-6085; HS-6110
EH190; EH255
mm (in)
700 (27.6)
mm (in)
1000 (39.4)
mm (in)
750 (29.5)
mm
300 x 300 x 250 (H)
(in)
(12 x 12 x 10 H)
mm
400 x 400 x 300 (H)
(in)
(16 x 16 x 12 H)
mm
150; 180; 200
(6; 7; 8)
(in)
mm
180; 250; 360
(7; 10; 14)
(in)
24
Fig. 2.6
Cod. 511485
Rev. 10/0918