Table of Contents
Advertisement
Table 9 Setup Wizard > WiMAX Frequency Settings (continued)
LABEL
End
Frequency
Bandwidth
#
Frequency (MHz)
Total Num
Delete
Add
OK
#
Band Start (KHz) Indicates the beginning of the frequency band in KHz.
Band End (KHz)
Total Num
Back
Next
3.1.4 WiMAX Authentication Settings
The WiMAX Authentication Settings screen allows you to configure how your
WiMAX Device logs into the service provider's network.
Note: These settings should be provided by your ISP.
Note: The EAP supplicant settings on this screen vary depending on the
authentication mode your select.
MAX318M2W User's Guide
DESCRIPTION
Enter the frequency value at the end of the frequency range to use.
Note: This field only appears when you select By Range under
Setting Type.
Set the frequency bandwidth in MHz that this WiMAX Device uses.
This is an index number for enumeration purposes only.
Displays the frequency MHz for the item in the list.
Displays the total number of items in the list.
Click this to remove an item from the list.
Click this to add an item to the list.
Click this to save an newly added item to the list.
This is an index number for enumeration purposes only.
Indicates the end of the frequency band in KHz.
Displays the total number of items in the list.
Click to display the previous screen.
Click to proceed to the next screen.
Chapter 3 Setup Wizard
35
Advertisement
Table of Contents
