Table of Contents
Advertisement
Chapter 7 Network Settings
7.7 DHCP
Use these settings to configure whether the WiMAX Device functions as a DHCP
server for your local network, or a DHCP relay between the local network and the
service provider. You can also disable the DHCP functions.
Click Network Setting > LAN > DHCP to open this screen as shown next.
Figure 38 DHCP Screen
This screen contains the following fields:
Table 30 DHCP
LABEL
DHCP Server
DHCP Mode
96
DESCRIPTION
Select this if you want the WiMAX Device to be the DHCP server on the
LAN. As a DHCP server, the WiMAX Device assigns IP addresses to
DHCP clients on the LAN and provides the subnet mask and DNS server
information.
•
None - This disables DHCP mode for the WiMAX Device.
•
Server - This sets the WiMAX Device as a DHCP server for the LAN.
•
Relay - This sets the WiMAX Device as a DHCP relay for the LAN,
allowing it to pass-through IP addresses assigned to LAN devices
from the ISP servers.
MAX318M2W User's Guide
Advertisement
Table of Contents
