3.1.4 WiMAX Authentication Settings
The WiMAX Authentication Settings screen allows you to configure how your
WiMAX Device logs into the service provider's network.
Note: These settings should be provided by your ISP.
Figure 7 Setup Wizard > WiMAX Authentication Settings
The following table describes the labels in this screen.
Table 7 Setup Wizard > WiMAX Authentication Settings
LABEL
Authentication
Authenticati
on Mode
EAP Supplication
EAP Mode
Anonymous
Id
Inner Mode
HES-309M Series User's Guide
DESCRIPTION
Select a WiMAX authentication mode for authentication network
sessions with the ISP. Options are:
•
No authentication
•
User authentication
•
Device authentication
•
User and Device authentication
Select an EAP authentication mode.
Enter your anonymous ID.
Note: Some modes may not require this.
Select an inner authentication mode.
Note: Some modes may not require this.
Chapter 3 Setup Wizard
27