Table of Contents
Advertisement
7.5 EtherIP
Use these settings to configure the peer setting of the EtherIP tunnel between the
WiMAX Device and another EtherIP peer.
Click Network Setting > WAN > EtherIP to open this screen as shown next.
Figure 36 EtherIP Screen
This screen contains the following fields:
Table 28 EtherIP
LABEL
Peer IP Address
7.6 IP
Use these settings to configure the LAN connection between the WiMAX Device
and your local network.
Click Network Setting > LAN > IP to open this screen as shown next.
Figure 37 IP Screen
This screen contains the following fields:
Table 29 IP
LABEL
IP address
IP Subnet Mask
MAX318M2W User's Guide
DESCRIPTION
Enter the IP address of the EtherIP peer.
DESCRIPTION
Enter the IP address of the LAN interface for the WiMAX Device.
Enter the IP subnet maks of the LAN interface for the WiMAX Device.
Chapter 7 Network Settings
95
Advertisement
Table of Contents
