Table of Contents
Advertisement
This screen contains the following fields:
Table 35 Static Route
LABEL
Destination IP
Subnet Mask
Next Hop
Metric
7.13 RIP
Use these settings to configure how the WiMAX Device exchanges information with
other routers.
Click Network Setting > Route > RIP to open this screen as shown next.
Figure 45 RIP Screen
MAX318M2W User's Guide
DESCRIPTION
Enter the destination IP address of the static route.
Enter the subnet mask of the static route.
Select Interface and then select WAN or LAN for the next hop of the
static route.
If the next hop is an IP address rather than an interface on the WiMAX
Device, select IP Address and enter the IP address.
Enter the static route metric.
Chapter 7 Network Settings
103
Advertisement
Table of Contents
