Table of Contents
Advertisement
7.3 PPPoE
Use these settings to configure the PPPoE connection between the WiMAX Device
and the service provider.
Click Network Setting > WAN > PPPoE.
Figure 34 PPPoE Screen
This screen contains the following fields:
Table 26 PPPoE
LABEL
User Name
Password
Retype
Password
Auth Protocol
MPPE
Encryption
MAX318M2W User's Guide
DESCRIPTION
Enter the username for PPPoE login into the WAN network.
Enter the password for PPPoE login into the WAN network.
Retype the password to confirm it.
Select a PPPoE authentication protocol. The WiMAX Device supports the
following:
•
CHAP - The Challenge Handshake Authentication Protocol (CHAP)
uses PPP to authenticate remote devices using a three-way
handshake and shared secret verification.
•
PAP - Password Authentication Protocol uses unencrypted plaintext
to send a passwords for authentication over the network. It's
probably not a good idea to rely on this for security.
•
MS-CHAP v1/2 -This is Microsoft's variant of Challenge Handshake
Authentication Protocol (CHAP). It allows for mutual authentication
between devices.
Use this option to enable or disable authentication through Microsoft
Point-To-Point Encryption (MPPE) protocol.
Chapter 7 Network Settings
93
Advertisement
Table of Contents
