Table of Contents
Advertisement
file. This means that you will lose all configurations that you had previously and
the password will be reset to "1234".
Figure 5 The Reset Button in the ODU
2.1.2.1 Using The Reset Button
Make sure the POWER LED light on the IDU is on (not blinking).
1
At the bottom of the ODU, open the water-proof cap of the first hole from the left,
2
if the WiMAX Device is facing up.
To set the device back to the factory default settings, press the Reset button for
3
five seconds or until all LED lights blink one time, then release it. The device
restarts when the defaults have been restored.
Reconfigure the WiMAX Device following the steps in your Quick Start Guide.
4
2.1.3 Saving and Canceling Changes
All screens to which you can make configuration changes must be saved before
those changes can go into effect. If you make a mistake while configuring the
WiMAX Device, you can cancel those changes and start over.
Figure 6 Saving and Canceling Changes
MAX318M2W User's Guide
RESET BUTTON
Chapter 2 The Web Configurator
27
Advertisement
Table of Contents
