Table of Contents
Advertisement
Chapter 3 Setup Wizard
The following table describes the labels in this screen.
Table 11 Setup Wizard > VoIP Settings
LABEL
Line 1 SIP Account - Configure this section to use the PHONE 1 port.
Enable
SIP Server
Port Number
Subscriber
Number
Display Name
Authentication
Name
Password
Line 2 SIP Account - Configure this section to use the PHONE 2 port. See the fields
above for similar description.
Back
Next
3.1.6 WLAN Settings
The WLAN Settings screen allows you to configure wireless LAN settings.
Figure 14 Setup Wizard > WLAN Settings
38
DESCRIPTION
Select this to activate the SIP account.
Enter the IP address or domain name of the SIP server.
Enter the SIP server's listening port number.
Enter your SIP number. In the full SIP URI, this is the part before the @
symbol.
Enter the name that appears on the other party's device if they have
Caller ID enabled.
Type the SIP user name associated with this account for authentication
to the SIP server.
Type the SIP password associated with this account.
Click to display the previous screen.
Click to proceed to the next screen.
MAX318M2W User's Guide
Advertisement
Table of Contents
