Chapter 4 Tutorials
Next, go to the Networking Setting > WAN screen and select NAT in the
7
Operation Mode field. Click Save.
Connect your computers to the WiMAX Device's Ethernet ports and you're all set!
8
Note: You may need to configure the computers on your LAN to automatically obtain
IP addresses. For information on how to do this, see
Once your network is configured and hooked up, you will want to connect it to the
Internet next. To do this, just run the Internet Connection Wizard
on page
31), which walks you through the process.
4.4 Changing Certificate
This tutorial shows you how to import a new security certificate, which allows your
device to communicate with another network servers.
Goal: Import a new security certificate into the WiMAX Device.
See Also:
44
Appendix E on page
249.
Appendix B on page
199.
(Chapter 3
MAX318M2W User's Guide