ZyXEL Communications max318m2w User Manual page 171

Table 68 CWMP (continued)
LABEL
ACS Password
Perodical
Inform Enable
Periodical
Inform Interval
Connection
Request
Username
Connection
Request
Password
CA Certificate
File
CA Certificate
Info
Client
Certificate File
Client
Certificate Info
MAX318M2W User's Guide
DESCRIPTION
Enter the password sent when the WiMAX Device connects to an ACS
and which is used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Select this to allow the WiMAX Device to periodically connect to the ACS
and check for configuration updates.
If you do not enable this feature then the WiMAX Device can only be
updated automatically when the ACS initiates contact with it and if you
selected the checkbox on this screen.
Enter the time interval (in seconds) at which the WiMAX Device
connects to the auto-configuration server.
Enter the connection request user name that the ACS must send to the
WiMAX Device when it requests a connection.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Note: This must be provided by the ACS administrator.
Enter the connection request password that the ACS must send to the
WiMAX Device when it requests a connection.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Note: This must be provided by the ACS administrator.
Click Browse to upload a Certificate Authority (CA) certificate to the
WiMAX Device.
This displays information about the currently active CA certificate.
Click Browse to upload a client certificate to the WiMAX Device.
This displays information about the currently active client certificate.
Chapter 12 Maintenance
171