Table of Contents
Advertisement
Chapter 6 WiMAX
Table 17 Authentication Settings (continued)
LABEL
Device
Private Key
Device
Private Key
Info
Device
Private Key
Password
Inner Mode
Username
Password
Options
Enable Auth
Mode
Decoration
in EAP Outer
ID
Enable
Service
Mode
Decoration
in EAP Outer
ID
Random
Outer ID
Ignore Cert
Verification
Same EAP
OuterID in
ReAuth
MAC address
in EAP-TLS
outer Id
74
DESCRIPTION
Browse for and choose a device private key, if required.
This field displays information about the assigned device private key.
Enter the device private key, if required.
Sets the EAP-TTLS inner mode.
The WiMAX Device supports the following:
•
MS-CHAP v2 - This is version 2 of Microsoft's variant of Challenge
Handshake Authentication Protocol (CHAP). It allows for mutual
authentication between devices.
•
MS-CHAP - This is Microsoft's variant of Challenge Handshake
Authentication Protocol (CHAP). It allows for mutual authentication
between devices.
•
CHAP - The Challenge Handshake Authentication Protocol (CHAP)
uses PPP to authenticate remote devices using a three-way
handshake and shared secret verification.
•
MD5 - Message-Digest, algorithm 5, (MD5) encryption is typically
used for checking file integrity. Because this encryption protocol
contains a number of serious security flaws it is generally not
recommended that you use it for authentication security.
•
PAP - Password Authentication Protocol uses unencrypted plaintext
to send a passwords for authentication over the network. It's
probably not a good idea to rely on this for security.
Enter the username required for the EAP-TTLS inner method.
Enter the password required for the EAP-TTLS inner method.
Select this to enable authentication mode.
Select this to enable service mode.
Select this to allow the WiMAX Device to generate a 16-byte random
number as a username for the EAP Identity Response message.
Select this to ignore base station certification verification when a
certificate is received during EAP-TLS or EAP-TTLS.
Select this to use the same EAP to the outer ID when reauthenticating.
Adds the MAC address of the WiMAX Device to the outer ID while the
EAP mode is set to EAP-TLS.
MAX318M2W User's Guide
Advertisement
Table of Contents
