Table of Contents
Advertisement
Chapter 13 Troubleshooting
I cannot Telnet to the WiMAX Device.
See the troubleshooting suggestions for
the web configurator.
13.3 Internet Access
I cannot access the Internet.
Check the hardware connections, and make sure the LEDs are behaving as
1
expected. See the Quick Start Guide and
Make sure you entered your ISP account information correctly in the wizard. These
2
fields are case-sensitive, so make sure [Caps Lock] is not on.
Check your security settings. See
3
Check your WiMAX settings. The WiMAX Device may have been set to search the
4
wrong frequencies for a wireless connection. See
unsure of the correct values, contact your service provider.
If you are trying to access the Internet wirelessly, make sure the wireless settings
5
in the wireless client are the same as the settings in the AP.
Disconnect all the cables from your WiMAX Device, and follow the directions in the
6
Quick Start Guide again.
If the problem continues, contact your ISP.
7
I cannot access the Internet any more. I had access to the Internet (with the
WiMAX Device), but my Internet connection is not available any more.
Check the hardware connections, and make sure the LEDs are behaving as
1
expected. See the Quick Start Guide and
Disconnect and re-connect the power adapter to the WiMAX Device.
2
188
I cannot see or access the Login screen in
Ignore the suggestions about your browser.
Section 1.2.1 on page
Chapter 8 on page
Section 1.2.1 on page
20.
127.
Chapter 6 on page
63. If you are
20.
MAX318M2W User's Guide
Advertisement
Table of Contents
