Table of Contents
Advertisement
7.17 ALG
Use these settings to bypass NAT on your WiMAX Device for those applications
that are "NAT un-friendly".
Click Network Setting > NAT > ALG to open this screen as shown next.
Figure 52 ALG Screen
This screen contains the following fields:
Table 42 ALG
LABEL
Enable FTP ALG
Enable H.323
ALG
Enable IPsec
ALG
Enable L2TP
ALG
Enable PPTP
ALG
Enable RTSP
ALG
Enable SIP ALG
SIP Port
Enable SIP ALG
Set BSID
MAX318M2W User's Guide
DESCRIPTION
Turns on the FTP ALG to detect FTP (File Transfer Program) traffic and
helps build FTP sessions through the WiMAX Device's NAT.
Turns on the H.323 ALG to detect H.323 traffic (used for audio
communications) and helps build H.323 sessions through the WiMAX
Device's NAT.
Turns on the IPsec ALG to detect IPsec traffic and helps build IPsec
sessions through the WiMAX Device's NAT.
Turns on the L2TP ALG to detect L2TP traffic and helps build L2TP
sessions through the WiMAX Device's NAT.
Turns on the PPTP ALG to detect PPTP traffic and helps build PPTP
sessions through the WiMAX Device's NAT.
Turns on the RTSP ALG to detect RTSP traffic and helps build RTSP
sessions through the WiMAX Device's NAT.
Turns on the SIP ALG to detect SIP traffic and helps build SIP sessions
through the WiMAX Device's NAT.
If you are using a custom UDP port number (not 5060) for SIP traffic,
enter it here.
Check this box to add the base station ID to the outgoing SIP
messages. Select this option only if the media server forwarding calls
requires this information.
Chapter 7 Network Settings
111
Advertisement
Table of Contents
