Table of Contents
Advertisement
Chapter 4 Tutorials
you want to send traffic from computer A (in N1 network) to computer B (in N2
network), the traffic is sent to the WiMAX Device's WAN default gateway by
default. In this case, computer B will never receive the traffic.
N1
You need to specify a static routing rule on the WiMAX Device to specify R as the
router in charge of forwarding traffic to N2. In this case, the WiMAX Device routes
traffic from computer A to R and then R routes the traffic to computer B.
N1
This tutorial uses the following example IP settings:
Table 13 IP Settings in this Tutorial
DEVICE / COMPUTER
The WiMAX Device's WAN
The WiMAX Device's LAN
A
54
A
A
IP ADDRESS
172.16.1.1
192.168.1.1
192.168.1.34
R
N2
B
R
N2
B
MAX318M2W User's Guide
Advertisement
Table of Contents
