Table of Contents
Advertisement
Chapter 12 Maintenance
Table 67 SNMP (continued)
LABEL
Trap Server
Trap
Community
12.7 CWMP
Use this screen to allow CWMP connections for remote management, firmware
upgrades and troubleshooting.
Click Maintenance > Remote MGMT > CWMP to open this screen as shown
next.
Figure 88 CWMP Screen
This screen contains the following fields:
Table 68 CWMP
LABEL
Enable
ACS Server URL Enter the URL or IP address of the auto-configuration server.
Bootstrap
Enable
ACS Username
170
DESCRIPTION
Enter the IP address of the station to send your SNMP traps to.
Enter the trap community, which is the password sent with each trap to
the SNMP manager. The default is public and allows all requests.
DESCRIPTION
Select this to enable remote management using this service.
Select this to enable bootstrap events.
Enter the user name sent when the WiMAX Device connects to the ACS
and which is used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
MAX318M2W User's Guide
Advertisement
Table of Contents
