Table of Contents
Advertisement
Chapter 1 Getting Started
1.2 WiMAX Device Hardware
Follow the instructions in the Quick Start Guide to make hardware connections.
1.2.1 LEDs
The following figure shows the LEDs (lights) on the WiMAX Device.
Figure 2 The Indoor WiMAX Device's LEDs on the Front Panel
Table 2 The Indoor WiMAX Device's LEDs on the Front Panel
LED
WIRELESS
On/Off
POWER
LINK
SIGNAL 1~3
20
STATE
DESCRIPTION
Off
The WPS (Wi-Fi Protected Setup) function is
disabled on the WiMAX Device.
Green
The WPS function is enabled on the WiMAX Device.
Off
The WiMAX Device is not receiving power.
Red
The WiMAX Device is receiving power but has been
unable to start up correctly or is not receiving
enough power. See the Troubleshooting section for
more information.
Solid Green
The WiMAX Device is receiving power and
functioning correctly.
Blinking Green
The WiMAX Device is performing a self-test.
Green
The WiMAX service set ID is registered and
operational.
Slow Blinking
The WiMAX Device is currently searching for a
Green
channel (approximate blink is speed 1 second per).
Fast Blinking Green
The WiMAX Device is currently the process of
joining a WiMAX network (approximate blink speed
is 0.5 second per).
The Signal LEDs display the Received Signal Strength Indication (RSSI) of
the wireless (WiMAX) connection.
No Signal LEDS
There is no WiMAX connection.
Signal 1 On
The signal strength is less than or equal to -90 dBm
Signal 2 On
The signal strength is less than or equal to -80 dBm
Signal 3 On
The signal strength is less than or equal to -70 dBm
MAX318M2W User's Guide
Advertisement
Table of Contents
