Adding Groups; Editing Groups - Yealink SIP-T42G User Manual

User Guide for the SIP-T42G IP Phone
the local directory.
Note
Local directory can be backed up
your system administrator.

Adding Groups

To add a group to the local directory:
Press the Directory soft key.
1.
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If the Local Directory is removed from the directory
Menu->Directory->Local Directory to enter the local directory.
Press the AddGr soft key.
2.
Enter the desired group name in the Name field.
3.
Press
4.
field.
If Auto is selected, this group will use the ring tone according to the priority: Contact ring
tone (refer to
(refer to Ring
according to the priority: Contact ring tone (refer to
Press the Add soft key to accept the change or the Back soft key to cancel.
5.
You can also edit or delete any newly added contact groups.

Editing Groups

To edit a group in the local directory:
Press the Directory soft key.
1.
38
on the provisioning server. For more information, contact
or , or the Switch soft key to select the desired ring tone from the Ring
Adding Contacts) >Account ring tone (refer to
Tones). If a specific ring tone is selected, this group will use the ring tone
refer to Directory on page
(
Ring Tones) >Phone ring tone
Adding Contacts) >Group ring tone.
36 , press
)