Language; Time & Date - Yealink SIP-T42G User Manual

Language

The default language of the phone user interface is English. If the language of your web browser
is not supported by the phone, the web user interface will use English by default. You can
change the language for the phone user interface and the web user interface respectively.
To change the language for the phone user interface:
Press Menu->Settings->Basic Settings->Language.
1.
Press
2.
Press the Save soft key to accept the change.
3.
Text displayed on the phone user interface will change to the selected language.
To change the language for the web user interface:
Select the desired language from the pull-down list at the top-right corner of web user
1.
interface.
Text displayed on the web user interface will change to the selected language.
Time & Date
The time and date are displayed on the LCD screen when the phone is idle. You can configure
the phone to obtain the time and date from the Simple Network Time Protocol (SNTP) server
automatically, or configure the date and time manually. If the phone cannot obtain the time and
date from the SNTP server, contact your system administrator for more information.
To configure the SNTP settings via phone user interface:
Press Menu->Settings->Basic Settings->Time & Date->SNTP Settings.
1.
Press
2.
from the Time Zone field.
or to select the desired language.
or , or the Switch soft key to select the time zone that applies to your area
Customizing Your Phone
27