Yealink SIP-T42G Quick Reference Manual

The Message Waiting Indicator on the idle screen indicates that you have new voice messages
waiting. The power indicator LED slow flashes red.
1. Press or the soft key.
2. Follow the voice prompts to listen to your voice messages.
1. Press the soft key when the phone is idle, press
2. Select an entry from the list, you can do the following:
Press the soft key to place a call.
Press the soft key to delete the entry from the list.
If you press the soft key, you can also do the following:
Select to view detailed information about the entry.
Select to add the entry to the local directory.
Select to add the entry to the blacklist.
Select to delete all the entries from the list.
1. Press the soft key when the phone is idle, and then select the desired group.
2. Press the soft key to add a contact.
3. Enter a unique contact name in the
4. Press the soft key to accept the change.
1. Press the soft key when the phone is idle, and then select the desired group.
2. Press or to select the desired contact, press the
from the prompt list.
3. Edit the contact information.
4. Press the soft key to accept the change.
1. Press the soft key when the phone is idle, and then select the desired group.
2. Press or to select the desired contact, press the
from the prompt list.
3. Press the soft key when "Delete Selected Item?" prompts on the LCD screen.
You can add contacts from the call history easily. For more information, refer to
Press during a call to adjust the receiver volume of the handset/speakerphone/
headset.
Press when the phone is idle to adjust the ringer volume.
1. Press the soft key when the phone is idle, and then select
2. Press or to select the desired ring tone.
3. Press the soft key to accept the change.
For more information, refer to the User Guide available online:
c
Copyright 2013 YEALINK NETWORK TECHNOLOGY CO.,LTD.
or to scroll through the list.
field and phone numbers in the corresponding fields.
soft key and then select
soft key and then select
above.
-> -> .
www.yealink.com
Applies to firmware version 71 or later.