Yealink SIP-T42G User Manual page 125

It is configured for the Retrieve soft key. This park retrieve code will also apply to the call
park key.
Click Confirm to accept the change.
6.
Note If the Park or Retrieve soft key doesn't appear on the LCD screen, please select Disabled from
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Layout.
To park a call in Transfer mode:
During a call, press the Park soft key (You may need to press the More soft key to see the
1.
Park soft key) or the call park key (if configured).
If the call park code is not configured, you need to enter the call park code (e.g., *01).
-
Press
parking lot.
If the call park code is configured, the call will be directly transferred to the shared
-
parking lot.
Note For some servers, the system will return a specific call park retrieve number (park retrieve
code) from which the call can be retrieved after parking successfully.
To retrieve a parked call in Transfer mode:
Do one of the following:
1.
, or the Park soft key. The call will be transferred to the shared
Basic Call Features
111