Call Hold/Resume - Yealink SIP-T42G User Manual

The mute key LED goes out.

Call Hold/Resume

You can place an active call on hold. Only one active call can be in progress at any time. Other
calls can be made and received while placing the original call on hold. When you place a call on
hold, your IP PBX may play music to the other party while waiting.
To place a call on hold:
Press the Hold soft key during a call.
1.
The line key LED flashes green. The LCD screen indicates that the call is on hold.
The phone will beep softly every 30 seconds to remind you that you still have a call on hold. The
Note
phone ignores engaged audio device (handset or headset) and switches to Speakerphone to play
the hold tone by default. The Speakerphone key will light up for 1 second.
To resume a held call:
Press the Resume soft key.
1.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
- Press
retrieve the desired call.
Press the corresponding line key to retrieve the call.
-
If more than one call is placed on hold, a numbered prompt appears on the LCD screen, for
example "2/3", indicating that this is the second call out of three calls.
or to switch between the calls, and then press the Resume soft key to
Basic Call Features
89