Yealink SIP-T42G User Manual page 112

User Guide for the SIP-T42G IP Phone
forwarding from the After Ring Time field.
The default ring time is 12 seconds.
(Optional.) Enter the no answer forward on code or off code respectively in the
4)
On Code or Off Code field.
You can also enable no answer forward for all accounts. After no answer forward was
enabled for a specific account, do the following:
Press
1)
Press the All Lines soft key.
2)
The LCD screen prompts "Copy to all lines?".
Press the OK soft key to accept the change or the Cancel soft key to cancel.
3)
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
If you enable call forward for the default account, the associated line icon will change to
and the icon
If you enable call forward for the non-default account, only the associated line icon will change
to .
If you enable call forward for all accounts, all line icons will change to
appear on the status bar.
If the forward on code or off code is configured, the IP phone sends the corresponding code to
the server when a certain action takes place. For example, if you set the Always Forward on code
to be *71 (may vary on different servers), and the target number to be 1234. When you enable
Always Forward on the IP phone, the IP phone sends *711234 to the server, and then the server
will enable Always Forward feature on the server side, hence being able to get the right status of
the extension.
Call forward is configurable via web user interface at the path Features->Forward&DND.
You can also enter the SIP URI or IP address in the Forward to field. For more information on
Note
using the SIP URI or IP address, refer to
Call forward is local to the phone, and may be overridden by the server settings. Call forward on
code or off code may be different between servers. For more information, contact your system
administrator.
98
or to highlight the No Answer Forward field.
will appear on the status bar.
Placing Calls
, and the icon
on page 80.
,
will