Yealink SIP-T42G User Manual page 106

User Guide for the SIP-T42G IP Phone
Press
2)
field.
(Optional.) Enter the DND on code or off code respectively in the On Code or Off
3)
Code field.
If the on code or off code is configured, the IP phone will send the corresponding
code to activate or deactivate DND on the server. It is
You can also enable DND for all accounts:
Do the following:
1)
Press the All On soft key if DND on code and off code are not needed on your
-
server.
After DND was enabled for a specific account on the step 2, press
-
highlight the DND Status field.
Press the All Lines soft key. The LCD screen prompts "Copy to all lines?".
Press the OK soft key to accept the change or the Cancel soft key to cancel.
Press the Save soft key to accept the change.
3.
If you enable DND for the default account, the associated line icon will change to
the icon
If you enable DND for the non-default account, only the icon
status bar.
If you enable DND for all accounts, the icon
change to
Note
When DND and busy forward are both enabled for a specific account, calls to the specific account
will be sent to the configured destination number. For more information on call forward, refer to
Call Forward on page 94.
To configure the DND authorized numbers via web user interface:
Click on Features->Forward&DND.
1.
Select Enabled from the pull-down list of DND Emergency.
2.
Enter the numbers in the DND Authorized Numbers field.
3.
92
or , or the Switch soft key to select Enabled from the DND Status
will appear on the status bar.
.
not available on all servers.
will appear on the
appears on the status bar and all line icons
or to
, and