Yealink SIP-T42G Quick Reference User Manual

How to (cont...):
REDIAL A NUMBER
To call the last dialled number:
• Press twice when the phone is idle to dial the last dialled number.
To call a previously dialled number:
1. Press to enter the Placed Calls list.
2. Press or until you reach the desired entry in the list.
3. Press or the Send soft key to place the call.
MUTE OR UN-MUTE A CALL
• Press to mute or un-mute an active call.
FORWARD A CALL
1. Press the Menu soft key.
2. Select Features and then Call Forward.
3. Select the desired forward type: Always Forward, Busy Forward, or No Answer Forward.
4. Enter the destination number you wish to forward calls to.
• For No Answer Forward, press
• Press the Save soft key to accept the change.
CREATE A CONFERENCE CALL
1. Press the Conf soft key during an active call. This will place the call on hold.
2. Enter the extension or external number of the second party, then press the Send soft key.
3. Press the Conf soft key again when the second party has answered the call.
• All parties are now joined in the conference call.
4. Press the End Call soft key to disconnect all parties.
PLACE A CALL ON HOLD & THEN RESUME THE CALL
To place a call on hold:
• Press the Hold soft key during an active call.
To resume a call from hold:
• Press Resume soft key when a call is on hold.
If there is more than 1 call on hold:
• Press or to select the desired held call, then press the Resume soft key to retrieve the
desired call.
Page 4 | Copyright © Telair Pty Ltd (ABN 92 119 713 745) | www.telair.com.au | 1800 telair (835 247)
or to select the desired ring time.
Yealink SIP-T42G
Ultra-elegant Gigabit IP Phone
Quick Reference User Guide
Copyright © Telair Pty Ltd (ABN 92 119 713 745) | www.telair.com.au | 1800 telair (835 247)