Installing A System Board - Dell PowerEdge C6320 Owner's Manual

Figure 61. Removing and installing the system board
1. screw (8)
3. system board assembly
Related Links
Safety instructions
Removing the system board assembly
Removing the cooling shroud
Removing the expansion card
Removing the heat sink
Removing the memory modules
Removing the optional LSI 2008 SAS mezzanine card
Removing the 1GbE mezzanine card
Removing the 10GbE mezzanine card

Installing a system board

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Follow the safety guidelines listed in the Safety instructions section.
Steps
1. Holding the system board by the edges, slide the system board into the system board assembly.
2. Install the screws to secure the system board to the system board assembly.
120
2. system board