Table of Contents
Advertisement
Steps
1
Disconnect all cables from the system board.
CAUTION:
Take care not to damage the system identification button while removing the system board from the chassis.
2
Holding the post, lift the blue release pin, and slide the system board toward the front of the system to disengage the connectors from
the slots on the chassis.
3
Incline the system board at an angle, and lift the system board out of the chassis.
Figure 109. Removing the system board
Next step
Install the system
board.
Installing the system board
Prerequisite
Follow the safety guidelines listed in
Steps
1
Unpack the new system board assembly.
CAUTION:
Do not lift the system board by holding a memory module, processor, or other components.
CAUTION:
Take care not to damage the system identification button while placing the system board into the chassis.
2
Holding the post and release pin, incline the system board, and lower the system board into the chassis.
3
Slide the system board toward the back of the system until the release pin clicks into place.
Safety
instructions.
Installing and removing system components
159
Advertisement
Table of Contents
