Installing A Processor - Dell PowerEdge C6320 Owner's Manual

Figure 42. Removing and installing a processor
1. processor shield
3. notch in processor (4)
5. socket release lever (2)
Related Links
Safety instructions
Removing the system board assembly
Removing the heat sink

Installing a processor

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: When installing only one processor, the processor must be installed in the processor 0 (for
the socket location, see the System board connectors section).
NOTE: If you are upgrading your processors, prior to upgrading your system, download and install
the latest system BIOS version from Dell.com/support/home. Follow the instructions included in
the file download to install the update on your system.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Unpack the processor if it has not been used previously.
NOTE: If the processor has already been used, remove any thermal grease from the top of the
processor by using a lint-free cloth.
3. Remove the system board assembly.
94
2. processor
4. socket key (4)
6. CPU socket