Dell PowerEdge C6320 Owner's Manual page 41

Option Description
System Memory Specifies the memory size in the system.
Size
System Memory Specifies the type of memory installed in the system.
Type
System Memory Specifies the system memory speed.
Speed
System Memory Specifies the system memory voltage.
Voltage
Video Memory Specifies the amount of video memory.
System Memory Specifies whether the system memory tests are run during system boot. Options
Testing are Enabled and Disabled. This option is set to Disabled by default.
Memory Specifies the memory operating mode. The available option is Optimizer Mode.
Operating Mode
Node Interleaving Specifies if Non-Uniform Memory architecture (NUMA) is supported. If this field is
set to Enabled, memory interleaving is supported if a symmetric memory
configuration is installed. If the field is set to Disabled, the system supports NUMA
(asymmetric) memory configurations. This option is set to Disabled by default.
Snoop Mode Specifies the Snoop Mode options. The Snoop Mode options available are Home
Snoop, Early Snoop, Cluster on Die, and Opportunist Snoop Broadcast. This
option is set to Early Snoop by default. This field is available only when the Node
Interleaving is set to Disabled.
Related Links
Memory Settings
Viewing Memory Settings
Processor Settings
You can use the Processor Settings screen to view the processor settings, and perform specific functions
such as enabling virtualization technology, hardware prefetcher, and logical processor idling.
Related Links
Processor Settings details
System BIOS
Viewing Processor Settings
Viewing Processor Settings
To view the Processor Settings screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish
booting, and then restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Processor Settings.
41