CAUTION: This removal and installation procedure is only for 2.5-inch SSD. Installing a 2.5-inch
hard disk drive into the adapter can cause performance issue.
Follow the safety guidelines listed in the Safety instructions section.
Steps
1.
Place the 2.5-inch SSD into the 2.5-inch adapter bracket.
2.
Secure the 2.5-inch SSD to the 2.5-inch adapter bracket with M3 screws.
Figure 25. Removing and installing a 2.5-inch SSD from the 2.5-inch adapter bracket
1.
2.5-inch SSD
3.
2.5-inch adapter
3.
Place the adapter assembly into the 3.5-inch hard drive carrier.
4.
Secure the adapter assembly to the 3.5-inch hard drive carrier with screws.
2.
M3 screw (2)
75