Installing A Cooling Fan - Dell PowerEdge C6320 Owner's Manual

3. locating pin (6)
3. Disconnect the fan cable from the fan connector on the cooling fan cage.
4. Lift the cooling fan with the sponge out of the cooling fan cage.
Figure 20. Removing and installing a cooling fan
1. cooling-fan cage
3. cooling fan 2
5. cooling fan 3
7. fan cable
Related Links
Safety instructions
Removing the system cover
Before working inside your system

Installing a cooling fan

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Follow the safety guidelines listed in the Safety instructions section.
Steps
1. Align the cooling fan with the sponge and slide it in the cooling-fan cage until the cooling fan is
firmly seated.
NOTE: The fan blades should face the control panel of the system.
2. Connect the fan cable to the connector on the cooling-fan cage.
68
4. power connector
2. cooling fan 1
4. sponge
6. cooling fan 4