Using Setup - ICP Electronics ROCKY-3732EVS Manual

4.3 Using Setup

In general, you can use the arrow keys to highlight items, press
<Enter> to select, use the PageUp and PageDown keys to change
entries, press <F1> for help and press <Esc> to quit. The following
table provides more details about how to navigate in the Setup
program using the keyboard.
Key
Up Arrow
Down Arrow
Left Arrow
Right Arrow
Esc
Move Enter
PgUp key
PgDn key
+ key
- key
Esc key
F1 key
F5 key
F6 key
F7 key
F10 key
Move to the previous item
Move to the next item
Move to the item on the left (menu bar)
Move to the item on the right (menu bar)
Main Menu: Quit without saving changes
Submenus: Exit Current page to the next
higher level menu
Move to the item you desired
Increase the numeric value or make changes
Decrease the numeric value or make
changes
Increase the numeric value or make changes
Decrease the numeric value or make
changes
Main Menu -- Quit and not save changes into
CMOS
Status Page Setup Menu and Option Page
Setup Menu -- Exit current page and return
to Main Menu
General help on Setup navigation keys
Load previous values from CMOS
Load the fail-safe defaults from BIOS default
table
Load the optimized defaults
Save all the CMOS changes and exit
26
Function