Machine Operation; Pre-Operation; While Operating - Mytee -Lite II 8020 User And Parts Manual

9. Connect vacuum hose to recovery tank.
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.

PRE-OPERATION

1. Vacuum carpet and remove other debris.
2. Perform MACHINE SETUP procedures.
3. Inspect power cord for damage.

MACHINE OPERATION

1. Turn pump switch on.
2. Hold down upholstery trigger lever to
clear air out of line. Do this until there is
a consistent flow of water. This will
prime the pump
NOTE: Always turn pump on and prime
pump first before turning on heater.
3. Turn on heater. Wait a few minutes
for water to heat up.
D. Turn on vacuum power
4. Begin cleaning
NOTE: When cleaning upholstery, always check
cleaning instructions sewn in furniture by
manufacturer.

WHILE OPERATING

WARNING: Flammable materials or
reactive metals can cause an explosion or fire.
Do not pick up.
1. Work away from outlet and power cord to
prevent cord damage.
2. Use a recommended foam control solution to
prevent vacuum motor damage. Periodically
check for excessive foam buildup in solution
tank.
3. To clean heavily soiled areas, repeat cleaning
path from different direction.
www.mytee.com
MYTEE-LITE II
7