Table of Contents
Advertisement
2 - Machine Operation
Before Operating
Take the included mesh
filter bag and place it over
the pump-out filter inside
the black recovery tank.
This filter helps prevent any
solid debris from damaging
the pump-out.
♦
2.1 - Powering the Speedster® LTD
Each power cord on the
Speedster® LTD requires
a grounded 20 amp outlet.
For dual cord machines,
plug each cord into its own
20 amp circuit. The dual
circuit indicator light and
tone will activate when this
is achieved.
♦
Components on each cord.
Machine
Primary Cord always marked with yellow tag.
LTD3
Primary Cord:
Secondary Cord: Vacuum 2
LTD3-LX
Primary Cord:
Secondary Cord: Vacuum 2
LTD5-LX
Primary Cord:
Secondary Cord: Vacuum 2
LTD12
Primary Cord:
Secondary Cord: Vacuum 2
2.2 - Connecting Vacuum & Solution Hoses
Use the included Cuff-Lynx™ hose connectors to connect
1.5" or 2" vacuum hose to the Speedster® LTD. Connect
the solution hose via the quick connect fitting on the front
of the Speedster® LTD.
2.3 - Filling the Solution Tank
Vacuum 1
600 Watt Heater
Pump
1,000 Watt Heater
Pump-Out
Vacuum 1
600 Watt Heater
Pump
The Speedster® LTD solution tank can be filled up from
a bucket via the opening under the solution tank lid or via
the auto-fill feature (section 2.5).
Pump-Out
Vacuum 1
IMPORTANT: Use only low foam or non foaming detergent
Pump
or shampoo. Damage due to excessive foam will void
warranty.
Pump-Out
IMPORTANT: Do not use acid (acid rinse) or high alkaline
Vacuum 1
chemicals like sodium hydroxide in the LTD3 or LTD5-LX
Pump
machines. This will cause damage to the pump and void
the warranty. ♦
Pump-Out
10
IMPORTANT: Do not pull on hoses in
order to move the unit. Only use the
appropriate handles.
♦
Advertisement
Table of Contents
