Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Mytee 8070
Summary of Contents for Mytee 8070
-
Page 2: Table Of Contents
Please read and review it carefully before using the equipment for the first time. It also contains information on optional accessories, cleaning tips, and a troubleshooting guide. We here at Mytee Products would like to welcome you to the team, and wish you the best for the future. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS This machine is intended for commercial use. It is designed to clean carpet and upholstery in an indoor environment and is not constructed for any other use. Use only recommended cleaning solutions and accessory tools. All operators must read, understand and practice the following safety precautions: WARNING: Flammable materials can cause an explosion or fire. -
Page 4: Warranty
Mytee Products Inc. (“Mytee”) or any authorized Mytee distributor/service center with this limited warranty. This limited warranty begins on the date of the customer’s purchase and is valid and available to the original purchaser only. Mytee’s products are for commercial use only and are not intended for personal, family or household uses. -
Page 5: Unpacking The Machine
Before unpacking the machine, inspect all boxes and pallets for signs of shipping damage. Please be aware that all packages leave Mytee Products in perfect condition. Any equipment or carton damage caused during shipping is the responsibility of the freight company, and should be handled by filing a claim with the carrier. -
Page 6: Optional Accessories
OPTIONAL ACCESSORIES The following accessories and tools are available for this unit, and can be purchased separately at your local Mytee dealer. You can find more information on any of them at www.mytee.com. Crevice tool (8700) System Maintainer Machine Rinse (3601) -
Page 7: Setup
SETUP Step 1 – Familiarize yourself with the parts of the machine, which will assist you in the remainder of the setup. 1. Recovery Tank 2. Solution Tank 3. Motor housing/ Base 4. Solution Hose Quick Connect 5. Vacuum Hose Connection Step 2 –... - Page 8 Step 3 - Unlock latch connecting recovery tank and solution tank. Remove recovery tank from solution tank. Carefully fill up solution tank. (Do not spill fluid in to vacuum chamber) ATTENTION: Do not use recovery tank to fill solution tank. Residual dirt or debris will cause damage to solution pump.
- Page 9 Step 6 - Connect vacuum hose to recovery tank. (Located on front of machine) Step 7 – Plug machine’s cord into a grounded wall outlet. FOR SAFETY: Do not operate machine unless cord is properly grounded. Do not operate machine with the use of additional extension cords.
-
Page 10: Operation
OPERATION Step 1 – Turn pump switch on. Step 2 – Hold down upholstery trigger lever to clear air out of line. Do this until there is a consistent flow of water. This will prime the pump NOTE: Always turn pump on and prime pump first before turning on heater. Step 3 - Turn on heater. -
Page 11: Tips
TIPS WARNING: Flammable materials or reactive metals can cause an explosion or fire. Do not pick up. 1. Work away from outlet and power cord to prevent cord damage. 2. Use a recommended foam control solution in the recovery tank to prevent vacuum motor damage. -
Page 12: Draining Recovery Tank
DRAINING RECOVERY TANK FOR SAFETY: When servicing machine, unplug cord from wall outlet. Step 1 - Turn machine off and unplug power cord. Remove vacuum hose. Step 2 - Unlock latch connecting recovery tank and solution tank. Step 3 - Remove recovery tank from solution tank. Step 4 - Empty recovery tank. -
Page 13: Maintenance
WEEKLY MAINTENANCE (EVERY 20 HOURS OF OPERATION) 1. Flush solution system with Mytee system maintainer to dissolve normal chemical buildup. Pour 7.5L (2 gal) of hot water 60°C (140°F) into solution tank. Add Mytee system maintainer according to mixing instructions on bottle. -
Page 14: Troubleshooting Guide
TROUBLESHOOTING SYMPTOM: UNIT WILL NOT TURN ON: PROBLEM: Not plugged in. SOLUTION: Plug machine in proper outlet. PROBLEM: Circuit breaker has popped. SOLUTION: Reset circuit breaker. Make sure no other items are running on the same circuit as machine. Outlet must be a 15-amp circuit. - Page 15 PROBLEM: Switch on switch plate is bad. SOLUTION: Replace switch. PROBLEM: Heating element is bad. SOLUTION: Replace element. SYMPTOM: VACUUM MOTOR IS NOT WORKING PROPERLY: PROBLEM: Hose not connected tightly to upholstery tool or machine. SOLUTION: Connect hose tightly. PROBLEM: Drain valve is not shut completely.
-
Page 16: Replacement Parts
DESCRIPTION PART NUMBER 2 Stage Hi- performance Vacuum C301 Motor 100 PSI Pump C305 1000 Watt Heater A901 Filter H664 2 Position Switch E515 Red Light Indicator E511 ½” Filter Strainer B119A Manual Thermostat E574 Auto Thermostat E573... - Page 17 Mytee Products Mytee Products Mytee Products Mytee Products 13655 Stowe Drive Poway, CA. 92064 Poway, CA. 92064 888-226-2724 www.UnoClean.com...