Tadiran Telecom T207M User Manual page 40

Upon Hearing Busy Tone
After dialing an external destination, the following features appear on your phone display when you hear a busy tone. Hang
up and dial later or press the nearby soft key to activate the required feature.
or MSG Leave Message is used when dialing network destinations and not external destinations.
[Msg.]
Use this feature to leave a "message" at a busy station. This feature lights the message waiting lamp at the
called party's station indicating that a message was left, and it leaves a simple message such as CALL
SUSAN on the destination station's keyset display. See
Camp On, also known as Call Back. Used only when dialing network destinations and not external
[Camp]
destinations. When the network station is busy, you may request that the system automatically call you back
when the required destination number is available. See
or MUTE Mute can be activated during ringback so that when the call is answered your side of the conversation is
[Mute]
muted and the called party will not hear you. When this feature is activated by the
toggle switch, a bullet appears to the left of
microphone for your speakerphone and handset and silences the ringer. Press the toggle key again to
reactivate the microphone.
Operating the Phone
Making External Calls
OUT trunk line
USER BUSY
↓→ Msg.
Camp
[Mute]
Mute
Messages: Options on page 61
Call Waiting: Receiving on page 48
and MUTE LED is lit red. The mute feature deactivates the
33
.
.
or MUTE on/off
[Mute]
T207M / T208M User Guide