Call Forwarding - Tadiran Telecom T207M User Manual

Call Forwarding

Calls arriving at your station can be forwarded to ring at various destinations, depending on the state of the terminal (all, busy,
no answer).
NOTE! Call Forwarding can also be configured for when your user presence is Logged Off and DND via
your Sea Softswitch portal. In addition, you can configure Call Forwarding to reject or forward
calls from specific stations via your Sea Softswitch portal.
A bullet appears next to any active forwarding feature on the Forwarding Options screen (Page 2 below), and an additional
bullet appears next to [Fwd] on the idle screen (Page 1 below).
Forwarding options are accessed by pressing
Forward All Forwards your incoming calls to another destination. You can still place outgoing calls from your terminal.
[FwAl]
If is activated, a *FWD* message appears on the top line to remind you that this feature has been
[FwAl]
activated at your station.
Station Telephony Features
Call Forwarding
from idle state.
[Fwd]
10:50
Page 1
user name
↓→ CalL
10:50
Page 2
user name
↓→ FwAl
26 May 2007 Company xyz
station number
[Fwd]
•
Rdil
26 May 2007 Company xyz
station number
•FwNa
FwBs
41
CmOn
Esc
T207M / T208M User Guide