8400 StateLine C | Operating instructions
Diagnostics & troubleshooting
Monitoring
7.4
Monitoring
The controller is provided with various monitoring functions which protect the drive
against impermissible operating conditions.
If a monitoring function responds,
an entry will be made into the
the response (TroubleQSP, Warning, Fault, etc.) set for this monitoring function will be
triggered,
the status of the internal device control changes according to the selected response,
controller inhibit is set, and the "DRIVE ERROR" LED on the front of the controller goes
on:
Response
None
Fault
Trouble
TroubleQSP
WarningLocked
Warning
Information
System error
48
logbook
of the controller,
Entry in the
Display in
Pulse inhibit
logbook
C00168
L
Controller
Acknowledgem
inhibit
ent required
(after 0.5 s)
Mains switching
is required!
from Firmware V06.00 - DMS 1.1 EN - 11/2011
LED "DRV-ERR"
OFF
OFF