Dell Z9500 Configuration Manual page 608

Z-series core and aggregation switche
Hide thumbs Also See for Z9500:
Table of Contents

Advertisement

install license {flash://filepath | ftp://userid:password@host-ip/filepath | scp://
userid:password@hostip/filepath | tftp://host-ip/filepath | usbflash://filepath}
EXEC Privilege mode
After you enter the command, the current Z9500 port configuration and license status are displayed. Enter Yes at the
prompt to continue the installation; for example:
??? Dell# install license ftp://122.3.12.34:/dell_license/z9500_J_Smith.xml
Vendor
: Dell
Service Tag
: XDF-5YU
Product
: Dell Networking Z9500
Feature(s)
: 36 Ports
Note: You must reload the chassis to activate a license.
Reloading the chassis will affect existing network traffic.
Continue to install license [yes/no] ? yes
Retrieving license....... (ok)
Validating license....... (ok)
Installing license....... (ok)
License installation successful. Restart chassis to activate license.
Dell# install license tftp://10.11.8.12/132.lic
!
3594 bytes successfully copied
Retrieving license ....... (OK)
LICENSE INFORMATION
Vendor
Product
System
Service Tag
License Service Tag
Feature
Retrieving license data ....... (OK)
Validating license ....... (OK)
Validating Service Tag in license ....... (OK)
Note: You must reload the chassis to activate the license.
System will continue to run with current active 84 ports until the next reload !
Continue to install license [yes/no]: yes
Installing license ....... (ok)
License installation successful. Restart chassis to activate license
Dell#Jul 1 11:00:58: %SYSTEM:CP %LICMGR-5-LICMGR_LIC_INSTALL_SUCCESS: License file install
is successful
4
Reboot the switch to enable the licensed port configuration.
reload
EXEC Privilege mode
Enter Yes at the prompts to save the port configuration and complete the reload; for example:
??? Dell# reload
System configuration has been modified. Save [yes/no] ? yes
Proceed with reload [ yes/no ] ? yes
Dell# reload
System configuration has been modified. Save? [yes/no]: yes
!
00:14:28: %SYSTEM:CP %FILEMGR-5-FILESAVED: Copied running-config to startup-config in flash
by default
Proceed with reload [confirm yes/no]: yes
Starting to save trace messages...done.
00:14:39: %SYSTEM:CP %CHMGR-5-RELOAD: User request to reload the chassis
84 Ports
[enabled]
[enabled]
: Dell
: Dell Force10 Z9500
: RtHvKsJ
: RTHVKSJ
: HW-Port-License 132 Ports
132 Ports
[disabled]
Pay As You Grow
608

Advertisement

Table of Contents
loading

Table of Contents