•
One lossless queue is used.
Figure 35. PFC and ETS Applied to LAN, IPC, and SAN Priority Traffic
QoS Traffic Classification: The service-class dynamic dot1p command has been used in Global Configuration mode to
map ingress dot1p frames to the queues shown in the following table. For more information, refer to
Classification and Queue
The following describes the dot1p-priority class group assignment
dot1p Value in
Priority Group Assignment
the Incoming
Frame
0
LAN
1
LAN
2
LAN
3
SAN
4
IPC
Assignment.
QoS dot1p Traffic
Data Center Bridging (DCB)
269