Dell Z9500 Configuration Manual page 227

Z-series core and aggregation switche

Hide thumbs Also See for Z9500:

Table of Contents

linecard portset displays counters for rate-limited traffic on a specified Z9500 line card and port set (distributed CoPP).

There are three line cards (0-2) with fixed ports on the Z9500. Line card 0 uses two sets of ports (port pipes): 0 to 1; line cards 1

and 2 use three sets of ports: 0 to 2.

In the show output, Rx Counters displays the number of bytes of control-plane traffic received, on which protocol-based rate

limiting is applied. Tx Counters displays the number of bytes transmitted to a control-plane CPU after protocol-based rate

limiting is applied. Drop Counters displays the number of bytes of control-plane traffic that have been dropped as a result of

protocol-based rate limiting.

Dell#show control-traffic protocol linecard 2 portset 0 counters

ARP RESP/ARP REQ

MULTICAST CATCH ALL

v6 MULTICAST CATCH ALL

DHCP RELAY/DHCP

v6 ICMP NA/v6 ICMP RA

v6 ICMP NS/v6 ICMP RS

v6 ICMP/ICMP

FTP/TELNET/SSH/L3 LOCAL TERMINATED

L3 UNKNOWN/UNRESOLVED ARP

VLT CTRL/VLT IPM PDU

L2 DST HIT/BROADCAST

VLT TTL1/TRACEFLOW/TTL0/

STATION MOVE/TTL1/IP OPTION/L3 MTU FAIL/SOURCE MISS

Dell#show control-traffic protocol cp-switch counters

Control Plane Policing (CoPP)

Troubleshooting