Changing The Is-Type - Dell Z9500 Configuration Manual

Changing the IS-Type

To change the IS-type, use the following commands.
You can configure the system to act as a Level 1 router, a Level 1-2 router, or a Level 2 router.
To change the IS-type for the router, use the following commands.
• Configure IS-IS operating level for a router.
ROUTER ISIS mode
is-type {level-1 | level-1-2 | level-2-only}
Default is level-1-2.
• Change the IS-type for the IS-IS process.
ROUTER ISIS mode
is-type {level-1 | level-1-2 | level-2}
Example of the show isis database Command to View Level 1-2 Link State Databases
To view which IS-type is configured, use the show isis protocol command in EXEC Privilege mode. The show config
command in ROUTER ISIS mode displays only non-default information. If you do not change the IS-type, the default value
(level-1-2) is not displayed.
The default is Level 1-2 router. When the IS-type is Level 1-2, the software maintains two Link State databases, one for each
level. To view the Link State databases, use the show isis database command.
Dell#show isis database
IS-IS Level-1 Link State Database
LSPID LSP Seq Num
B233.00-00 0x00000003
eljefe.00-00 * 0x00000009
eljefe.01-00 * 0x00000001
eljefe.02-00 * 0x00000001
Force10.00-00 0x00000002
IS-IS Level-2 Link State Database
LSPID LSP Seq Num
B233.00-00 0x00000006
eljefe.00-00 * 0x0000000D
eljefe.01-00 * 0x00000001
eljefe.02-00 * 0x00000001
Force10.00-00 0x00000004
Dell#
Controlling Routing Updates
To control the source of IS-IS route information, use the following command.
• Disable a specific interface from sending or receiving IS-IS routing information.
ROUTER ISIS mode
passive-interface interface
– For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
– For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.
– For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.
– For a port channel interface, enter the keywords port-channel then a number.
LSP Checksum LSP Holdtime ATT/P/OL
0x07BF 1088
0xF76A 1126
0x68DF 1122
0x2E7F 1113
0xD1A7 1102
LSP Checksum LSP Holdtime ATT/P/OL
0xC38A 1124
0x51C6 1129
0x68DF 1122
0x2E7F 1113
0xCDA9 1107
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
Intermediate System to Intermediate System 471