entry is created only for group 239.0.0.1. VLAN 300 has no access list limiting Receiver 1, so both IGMP reports are accepted
and two corresponding entries are created in the routing table.
Figure 96. Preventing a Host from Joining a Group
The following table lists the location and description shown in the previous illustration.
Table 56. Preventing a Host from Joining a Group — Description
Location
Description
1/21
•
•
•
•
1/31
•
•
•
Interface TenGigabitEthernet 1/21
ip pim sparse-mode
ip address 10.11.12.1/24
no shutdown
Interface TenGigabitEthernet 1/31
ip pim sparse-mode
ip address 10.11.13.1/24
Multicast Features
568